Pump body, seal holder cover, filter and filter cover, motor casing, outer casing with handle, cable compartment cover in AISI 304 stainless steel. Driving shaft in AISI 316 stainless steel. Vortex back flowing impeller in micro cast AISI 304 steel. Handle coated with insulating rubber. Double mechanical seal with oil chamber interposed, carbon/alumina on motor side and silicon/silicon carbide on pump side. Dry motor, asynchronous, watertight, cooled by the pumped liquid itself. Standard thermal protection in the winding. Capacitor permanently on in the single-phase version. 10 metres of H07RN-F power cables with electric plug are supplied as a standard feature. All models can be supplied either with or without float.
Operating range: from 3 to 35 m3/h with head up to 9 metres
Liquid temperature range: from 0°C to +50°C from 0°C to +35°C for domestic use
Pumped liquid characteristics: sewage water and waste water in general, not aggressive.
Maximum working temperature: + 40°C with the motor out of the water
Free passage of solids: 50 mm
Maximum immersion depth: 10 metres
Protection level: IP 68
Insulation class: F
Installation: fixed or portable, in a vertical position