Pump body, impeller, motor flange, filter and filter cover, motor casing, outer casing with handle, cable compartment cover in AISI 304 stainless steel. Driving motor in AISI 316 stainless steel. Handle coated with insulating rubber. Double mechanical seal with oil chamber interposed, carbon/alumina on motor side and silicon/silicon carbide on pump side. Dry motor, asynchronous, watertight, cooled by the pumped liquid itself. Standard thermal protection in the winding. Capacitor permanently on in the single-phase version. 10 metres of H07RN-F power cables with electric plug are supplied as a standard feature All models can be supplied either with or without float.
Operating range: from 3 to 23 m3/h with head up to 14.2 metres
Liquid temperature range: from 0°C to +50°C from 0°C to +35°C for domestic use
Pumped liquid characteristics: rain water, phreatic water, sandy water from building yards and clean waste waters, not aggressive.
Maximum working temperature: +40°C with the motor out of the water
Granulometric passage through the suction grid: 12 mm
Maximum immersion depth: 10 metres
Protection level: IP 68
Insulation class: F
Installation: fixed or portable, in a vertical position