Portable self-priming centrifugal pump for gardening, horticultural, washing and DIY use. Equipped with handle to ease transportation, 2 meters of H07RN-F type power supply cable including plug and switch. Compact and easy to install, selfpriming for the suction of tanks, wells and waterways in the presence of air bubbles. Suitable for use with water having small amounts of sand. Stainless steel pump casing. Die-cast aluminium motor support. Technopolymer rotor, diffuser and Venturi tube. Stainless steel seal disc and adjustment ring. Carbon/ceramic mechanical seal. Asynchronous, closed, cooled by external ventilation. Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life. Incorporated thermal-amperometric protection and capacitor permanently on. Constructed following the CEI 2-3 and CEI 61-69 (EN 60335-2-41) standards.
Motor protection level: IP 44
Terminals protection level: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V / 50 Hz
Operating range: from 0.4 to 5.4 m3/h with head up to 54 meters.
Pumped liquids: clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallised and chemically neutral and close to the characteristics of water.
Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).
from 0°C to +40°C for other uses.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa), 6 bar (600 kPa) for Technopolymer models only.
Installation: fixed horizontally.
Special versions on request: other voltages and/or frequencies.